钱柜娱乐手机网页
地址:齐河县焦庙镇小李村西邻
联系人:卢经理
电话:0531-87266820
传真:0531-87266820
邮箱:390062028@qq.com
网址:www.sdjnxps.com
当前位置:首页 - 技术与应用-技术支持
技术与应用
挤塑板厂家品质检查检验保证
作者:admin 来源:本站 发布时间:2016-10-24 16:40:41 浏览次数:391
一、挤塑板厂家保障项目:
A security project extruded board manufacturers:
1)挤塑板、网格布的规格和各项技术指标,聚合物沙浆配备布置原料的品质务必合乎要求。
1) extruded plate, mesh specifications and technical index of polymer mortar, set the quality of raw materials must meet the requirements.
2)挤塑板务必与墙面粘附坚固,无松驰和虚粘现象。
2) board and wall adhesion must be strong, no relaxation and virtual sticky phenomenon.
3)聚合物沙浆与挤塑板务必粘附紧急,无脱层、空鼓、面层无爆灰和裂隙。

3) polymer mortar and extruded plate adhesion must be urgent, no delamination, hollowing, surface layer and non explosive ash and fissure.

钱柜娱乐777官网手机登录

二、挤塑板厂家基本项目:
The basic project two, extruded board manufacturers:
1)每块挤塑板与基层面的总粘附平面或物体表面的大小为30—50百分之百
1) and the total of each board base adhesion plane or surface size of 30 - 50 one hundred percent
固定件胀塞局部进入了结构墙体不小于50。
Part of the fixed part of the expansion plug into the structure of the wall is not less than 50.
2)挤塑板会面缝不抹粘接剂。
2) board meeting with adhesive joint.
3)网格布应横向铺贴,压粘紧密,来不得空鼓、皱褶、翘边、外露等现象,水准方向搭接宽度不小于100,铅直方向搭接宽度不小于80。
3) mesh should be transverse paving, pressure viscosity close, no hollowing, fold, curling and exposed the phenomenon, lap width not less than 100 level direction, vertical direction, lap width not less than 80.
4聚合物沙浆厚度不适宜大于4,首层半大于5。
4 polymer mortar thickness is not suitable for more than 4, the first half layer is greater than 5.
有了上面的小总结,希望对广大客户有所帮助,如果有什么不理解的或者寻求帮助的请点击我们的官方网站:钱柜娱乐777官网手机登录或者来电咨询,我们会尽全力为您解决
There is a small sum above, hope to help customers, if what you do not understand or seek help please click on our official website: Ji'nan board manufacturers or contact us, we will do our best for you to solve